7 Steps to Resolve Epson Printer Error Code E-01

Are you facing Epson Printer Error-Code E-01 and want to fix it? Well if yes, then you are landed on the right page because here we have mentioned step by step guide to eradicate this error which is suggested by Epson printer customer Support Number Experts.

Now the question arise what does Error E-01 Signifies?

Generally Error E-01 Signifies that Ink Cartridge of machine is empty and due to this user are unable to take print out from machine.

Troubleshoot Epson Error Code E-01:

1. First of all you need to remove the cartridges from printing machine.

2.   After this you have to clean the chips with a soft cotton cloth.

3.   Now you need to disconnect the power supply and also Disconnect the USB cable.

4.   Tap on the "Power" button for few times (around 2-3 minutes) then release it.

5.   Again properly connect the USB and power cables.

6.   Turn ON the printing Machine

7.   At last you have to finally install the cartridges.

If still error E-01 shows during the installation of a new cartridge then the cartridge may be defective and you need to replace to get rid of this error.

Hope above listed steps will work for you, if still error is constant then you have to ask for experts help.

Need Help! Contact Epson Customer Support

If error remain constant then for additional assistant contact toll-free 1-800-862-1908 Epson Printer Customer Support Phone Number. Here technical experts are ready to assists you with real time solution.

6 Essential Steps to Disable the Epson Status Monitor Utility

Do you want to disable the Epson Status Monitor Utility?

If yes, then first you must know what is Epson Status Monitor Utility and its function.

Epson Status Monitor Utility: 

It is a utility which monitors your printing machine and gives information on various errors and printer ink levels.

Now the question arise what is the need to disable Utility?

If sometime you want to use WIC Reset Utility then you need to disable this utility first.

Follow the below listed instructions to disable utility:

1. First you have to Open the Devices and Printers/ Printers folder and properly enter the Maintenance / Utility section of the printer driver.

2. Now you have to Right-tap on the printer icon, and then left-click on Printing Preferences option.

3. Hit on the Maintenance or Utility tab option.

4. After executing the above steps successfully click on the Speed & Progress / Extended Setting button.

5.  Speed & Progress / Extended Settings window contains more advanced settings option which relate to Status Monitor.

6. By default Status Monitor is enabled. Then you have to check the Disable Status Monitor and click on Ok button.

Need Help| Contact 1-800-862-1908 Epson Printer Customer Support

If above listed way of disable the utility is not efficient for you the no need to worry. It’s recommended to contact third Epson Printer Customer Support Phone Number For help. You can find toll-free service number at Printersupportsnumber.Here proficient experts resolve your all printer related query within short duration.

Common Brother Printer Error codes and its solution

Brother printers are known for its top class print quality and interactive interface. But like other printers it also exhibits some kind of issues and error codes. You can also handle most of the issues yourself if you know what these error codes stand for. Or you can simply get in touch with Brother Printer Customer Support Number 

to get step by step guide to fix these kind of printer issue and bugs easily.

Here we have mentioned the most common Brother Printer Error Codes:

Error E50

This type of error code throw by brother printer when there has been a some kind of fault in the fuser unit and the temperature. To resolve this issue you need to switch off the machine for some time then turn on again. If still problem persists, then call Brother Printer Customer technical number for instant help.

Error E51

This error occurs when laser unit becomes defective and the laser beam is not being detected. If you want to get rid of this issue then try switching the printer machine off and on again or replace the laser unit with newone.

Error E52

If some type of malfunction occurs in laser motor with the spinning mirror and motor itself developing a fault then printer show this error code. To fix this issue just Turn off the printer and turn on back.

Error E60

This type of error occurs when there has been a malfunction of the fan. To fix this issue try switching the printer off and on or seek a replacement fan if the problem persists.

Still, if you are unable to overcome from these kinds of issues then no need to panic. Then it’s recommended to call on Brother printer customer service number 1-800-862-1908 for instant help. Here experts Squad resolve your all kind of query without holding your issue too long.

Lexmark printer won't recognize refilled Ink cartridge – Causes and its Solution

Are you facing Lexmark Printer not detecting the Refilled ink cartridge issue?
If yes, then here in this blog we have mentioned some causes why this error occurs and how to resolve it.
Most of the user prefers to refill the inkjet cartridge instead of buying a new one. But sometimes it happens when printer not detects the refilled ink cartridge. You can take step by step guide to resolve this issue from to get in touch with Lexmark customer support number. And below we also mentioned some causes as well as a solution for the same error.

Lexmark Cartridge Not Installed Properly
This error mainly occurs when the refilled ink cartridge is not properly aligned in the printer. To avoid such error always make sure that ink cartridge aligns in the proper position. If you are facing any kind of problem while reinstalling the cartridge then take help from Lexmark printer support.

Incompatible Ink
Sometimes it happened the ink which you refill in ink cartridge is not compatible with your printer. Because for specific printer specific type of refill kit available. If the ink is not compatible with your machine then it will not access the ink. To get rid of this error always buys a compatible refill kit.

Sometime Cartridge not be designed for Recycling
Some Lexmark printer unable to use the refill ink cartridge. Its only use specific ink cartridge which is designed for specific printer model. If the ink cartridge is empty then, in that case, you should have to replace with new one ink cartridge to avoid the Lexmark Printer not detecting the Refilled ink cartridge.


If the error doesn’t get fixed then recommended to call Lexmark printer customer support number 1-800-862-1908. Here Lexmark customer care experts resolve your all query as quickly as possible without holding the issue too long.


Source URL - https://elizaswift12.tumblr.com/post/164436753678/fix-lexmark-printer-wont-recognize-refilled-ink

Most common printing problems with Kodak Printer and its solution

The printer has become the most used peripheral device of System; basically, it is used for the printing purpose. But sometimes situation becomes very annoying when the printer goes through error and does not perform according to the expectations of users. Printer commonly falls to very annoying bugs while it is running. You can also overcome these common bugs with some easy resolution steps or call Kodak printer support phone number for immediate technical help.

Below we have mentioned some most common Kodak printer error with its solution

• Carriage jam:

To get rid of this issue Open access door of printer carefully and fix all kind of obstructions and also ensure that ink cartridges and printhead are installed properly.

• Ink cartridge issue:

To fix this kind of error in Kodak printer always make sure that only KODAK Ink Cartridge is installed in Kodak printer and don’t use other brand ink cartridge. Always place cartridges into proper place.

• Printer won’t print issue:

Sometimes it happened while using the printer suddenly some technical issue occurs and Printer won’t print issue arise. Always use the power cord which comes with your printer and it should be connected to the AC adapter properly.

• Paper jam issue

When the user feeds more than recommended paper sheets in paper feeder tray then it causes the paper jam in the machine. To fix this error, just reset your printer and remove the jammed paper from the machine.

Still, if you are upset with Kodak printer common issues, then it’s recommended to call on Kodak printer technical support number 1-800-862-1908 to get help from an expert Squad to fix you all kind of printer issues on time and with satisfactory result. 

Steps to Fix Lexmark Error code 200 – Paper Jam Issue

Are you facing Lexmark Error code 200?

If yes, Well here we figure out the main cause of this error and how to fix Lexmark Error Code 200 with ease.

Cause of Error 200-If there is any kind of Physical damage in paper tray.

Sometime it happened when there is no paper jam in the printer still you receive this error when you turn the ON the printer.

Initially you manually fix this error like checking if something blocking the sensor. Check the paper path, Orientation of paper tray etc. If still error doesn’t resolve then call Lexmark printer customer care phone number to fix glitch.

Below we mention steps to fix Lexmark Error 200

1.    Open the upper front cover of printer.

2.    Carefully take out the print cartridge from the printer, by pull it towards you and slightly up to lift it out of the holder.

3.    Pull the ink cartridge straight out.

4.    Find the feed roller release lever & gently push it back to release the pressure on the paper       

5.    Gently pull out the paper.

6.    If there is no paper jam under the cartridge, then remove paper tray.

7.    Then, you have to install the toner cartridge and paper tray.

8.    Finally you have to close the upper front door.

Still, if you are facing the 200 Error Code, then it’s recommended call on toll-free LexmarkPrinter Customer Support number 1-800-862-1908 to get instant help from an expert to fix issues. Here Lexmark support Service team Assist to help you 24*7.

Source url - http://www.techsite.io/p/646123

Update Your Print Driver to Improve Kodak Printer Performance

You want to improve Kodak Printer performance?

Then here we discuss method for how to increase Kodak printer performance after updating Printer Driver.

We all know that everything need occasional tune-up to work smoothly and consistently. Just like this printer also need regular care and maintenance.

Now the question is arise what is a printer driver?

Generally driver of printer takes the information from user System and converts it into instructions that the printer can recognize.

Generally printer driver help to print out your document.

At what time you need to be updating your Kodak printer driver?

If printer working smoothly then no need to update its driver. But if you are facing some issue with your printer then you should update the driver.

Some main cause when you need to update printer driver

•        Decreasing print quality

•        Unreliable connection to the network

•        Impassive printer

Steps to update Kodak printer driver:

1.      First you have to search and locate the model of your printer. This information generally on the front, back or side panels of the printer. Different printer has different driver that’s why you ensure about the model of printer.

2.      Find the latest driver of printer from official website. When it prompted, then you have to enter the make and model of the printer. Always ensure you’ve got the latest update according to your needs.

3.      Finally you have to Test your printer by using numerous applications to guarantee the update worked.

If you are using Kodak printer and want to improve its performance then follow the instruction given in blog carefully. If still printer performance is sluggish then no need to worry call @ Kodak printer technical support number for help.

Source Url - http://printersupportsnumber.blogdon.net/update-your-print-driver-to-improve-kodak-printer-performance-3785575